OPTIBAR P 2010

Pressure transmitter for hygienic pressure and level applications

• Ultra-compact design with flush diaphragm: with 3A certification
• 0.1…40?bar?/ 4…580?psi; max. +150°C?/ +302°F (for SIP/CIP)
• Many hygienic connections available
• 2-wire 4…20?mA
  

  Specifications

  Depending on selected device configuration

  General information

  Product type	Pressure transmitter
  Product family name	OPTIBAR
  Product positioning	For hygienic pressure and level applications
  Measurement principle	Hydrostatic
  Measured media	Liquids, Gases
  Measuring point	Open tank

  Operating conditions

  Process pressure	max. 40 bar/ 580 psi
  Process temperature	-40…+150°C/ -40…+302°F

  Materials

  Diaphragm	Austenitic stainless steel (1.4435/316L)
  Fill fluid	Silicone oil, Food grade oils (FDA listed)
  Measuring cell seal	Fluoroelastomer rubber (FKM), Perfluoroelastomer rubber (FFKM)

  Process connections

  Thread connections	Male: Hygienic G?, G1 for hygienic adapters G?, G?, G1 (DIN 3852)
  Hygienic adapters	Clamp (DIN 32676): DN25, DN32, DN40, DN50 Clamp (ISO 2852): 25, 38 51 Tri-Clamp: ?”, ?”, 1″, 2″ Collar ferrule (DIN 11851): DN25, DN40, DN50 VARIVENT??N

  Approvals/Standards

  Certificates/Approvals Ex	ATEX, IECEx
  Certificates/Approvals Hygienic	FDA, 3A, EC 1935/2004
  Certificates/Approvals Others	Pressure Equipment Directive (PED)

  Communication

  Analogue outputs

  0…10?VDC, 4…20?mA

  Overview

  The OPTIBAR P 2010 is an ultra-compact pressure transmitter with flush diaphragm for hygienic pressure and level applications in the food and beverage as well as in the pharmaceutical industry. It is perfectly suited for front-flush and aseptic installation. The versatile pressure and level transmitter provides a repeatable measuring signal that is stable over the long term, even with regular SIP/CIP cleaning cycles, while simultaneously guaranteeing a high degree of chemical resistance to process and cleaning solutions.

  Features & Options

  The modular design of the OPTIBAR?P?2010 allows combining a wide range of fully welded process connections with a variety of filling media and electrical connections so as to accommodate virtually any hygienic requirement. Optional cooling fins can be added to handle continuous process temperatures up to +300°C?/ +572°F.

  Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

  • Fully welded hygienic design with surface roughness of Ra <0.4?μm
  • Suitable for SIP (Sterilisation In Place) and CIP (Cleaning In Place)
  • 3A certified process connections
  • Extraordinary accuracy of ±0.25%
  • Outstanding temperature stability
  • Long-term stability: ±0.1%/year (uncertainty)
  • Modular design: free combination of device options such as electrical connections, diaphragm material, fill oil, measuring range, process connections
  • Ingress protection up to IP68 / NEMA 6P
  • ATEX/IECEx intrinsically safe approval for Zone 0